Need instructions on installing wraith/mamba 25 combo

[hotrodder]

Help!!!!!!!!
I need some help in installing my new combo, no instructions came with it....
Any help will be appreciated..
Tanks,
rcjoe
email..........noslo6@cox.net

[mostly broken]

I think the motor works best on the left side. I would also put the speed control on the deck in place of the other motor. make sure that your antenna is not touching the lead wires from the motor. You will probably need to program the speed control so I would check on line for instructions. I use industrial strength velcro to mount my electronics the kind with a sticky back, it works great.

[hotrodder]

thanks got it all working not are hard as I thought..
rcjoe

[rian]

hows it working??

[mlstman]

I don't see how mounting the motor on the left side is any better than the right...I have my mamba on the right and it works ok.

[GraysonAuto]

mine is on the left and it seems my biggest thing about this set up (mamba 25 comp x) is trying to figure out the right program to use. I am having huge problems trying to get it programmed so it doesnt bog on the start and keeps torque available for climbing or even going through the grass -- seems to bog down badly when any type of hill or resistance comes up.

i also have the viscous diff conversion and center locking diff gear.

once moving and i get it out of the bogging issue after gently applying the throttle and building speed, it is very fast