MGT Parts for sale

[eraser]

Axial Rims, Dyed blue with Cubez tires, never used, tires ARE glued 17mm hex $50
http://beanercow.com/101CASIO/CIMG1410.JPG

Proline 23mm Wheels with Badlands tires, used, lots of tread still left, great bashing tires...although i used them for the track $30 SOLD
http://beanercow.com/101CASIO/CIMG1411.JPG

Hardcore Titanium skids and Braces, one is slightly bent, but is easily bent back, individually these cost about $20-$50 each... asking $70 for everything pictured
http://beanercow.com/101CASIO/CIMG1412.JPG

Hardcore racing Front and rear aluminum shock towers, includes shock post mounts $30 for both SOLD
http://beanercow.com/101CASIO/CIMG1413.JPG

Gas tank, includes primer bulb $10
http://beanercow.com/101CASIO/CIMG1414.JPG

Axial .32, still starts, another gallon and it should be rebuilt $100, great engine....includes adjustable engine mount and aluminum clutch and clutch bell
http://beanercow.com/101CASIO/CIMG1415.JPG

Rear mount Black CVEC Pipe and header, will fit stock engine or Axial engine..worked great for me....$75
http://beanercow.com/101CASIO/CIMG1416.JPG

Transmission with FOC installed .gear included $100
Titanium Brake pads and stock disk pictured $10
Drive Axles $15 for the set
http://beanercow.com/101CASIO/CIMG1417.JPG

RPM Knuckles with all bearings, spacers, ball retainers $40
http://beanercow.com/101CASIO/CIMG1418.JPG

Hardcore racing Titanium Hinge Pins $20
http://beanercow.com/101CASIO/CIMG1419.JPG
Used Proline Powerstroke shocks with alum ends and white spring combo.... $100
http://beanercow.com/101CASIO/CIMG1420.JPG
4 Proline 23mm hexes with 4 extra nuts $25
http://beanercow.com/101CASIO/CIMG1421.JPG

4 used AE Titanium tie rods front and rear with wrench $40
http://beanercow.com/101CASIO/CIMG1422.JPG
Factory team steering setup with the dude steering piece $35

http://beanercow.com/101CASIO/CIMG1423.JPG
Proline Powerstroke shocks New, never used... $150

http://beanercow.com/101CASIO/CIMG1424.JPG

Proline Cheyenne 23mm hex with 40 series tires...(forget the name of them)
http://beanercow.com/101CASIO/CIMG1425.JPG

Diffs $20 each? (have 4 total)

http://beanercow.com/101CASIO/CIMG1426.JPG

Set of black RPM A-arms..modified without center post to clear powerstrokes... installed but never ran on... $35

http://beanercow.com/101CASIO/CIMG1427.JPG
Used Blue Hardcore Alum Arms, good condition $85
http://beanercow.com/101CASIO/CIMG1428.JPG

Blue Hardcore Aluminum Arms New in package $100 SOLD
http://beanercow.com/101CASIO/CIMG1429.JPG
Silver Hardcore Aluminum Arms New in package $120
http://beanercow.com/101CASIO/CIMG1430.JPG
Stock .28 Engine, about 2 gallons through it... broken pullstart, drill start still works...$80

http://beanercow.com/101CASIO/CIMG1431.JPG
Body i have that i made fit the MGT.. $10

http://beanercow.com/101CASIO/CIMG1432.JPG
Stock MGT Body New in package, not painted $20

http://beanercow.com/101CASIO/CIMG1434.JPG
Dude Cups and steering piece... $10 for the steering thingy.. and $40 for both sets of cups. Cups are SOLD
GPM Titanium brake disc $20
http://beanercow.com/101CASIO/CIMG1436.JPG



2 sets of 4 axles, disassembled but will include new in bag rebuild kits to build all axles, these are all from a 4.6 MGT for those that know the small difference....$50 for a set of 4

The Dude a-arm mounts (4 total) $50-SOLD


all prices are plus shipping... if it can fit in a flat rate priority envelope shipping is $6.

I wont have any radio equip or servos for sale....


I was a little more active on the old board but havent really been active since the move here...

email me at owner AT d16a.org with any questions....i want to eventually list everything...so email me if you need anything.... paypal only accepted as payment...all price are OBO

[riceman]

PM and e-mail sent - dude a-arm mounts.

[Braden]

I knew someone was going to buy he mounts right away. lol

[jamminman001]

i got stock mgt body sending pm now

[eraser]

updated with pics

[TRY2KPUP]

Email sent for the Dude outdrive cups.

[rollinondubz2002]

Proline 23mm Wheels with Badlands tires, used, lots of tread still left, great bashing tires...although i used them for the track $30

hey whats they shipped to 33948

[JEMCIV]

whats the outer diameter of those cubes? I'm looking for a smaller alternative to my CEN Nemesis tires.

[Killer GT]

I'll take the hardcore racing shock towers, bumpers, and the used set of blue arms( if the new ones in the package are a complete set i'll take those instead)!, i have a deal with duckedup for his chassis so this stuff would match perfect!!!!
Also would u sell all of this shipped to me in Canada for $180????
thnx

[Killer GT]

actually i don't need the bumpers so all i want is a set of blue arms (new set if its a complete set} and shock towers!
thnx
would u do that for $120 shipped to Canada???

[eraser]

Proline 23mm Wheels with Badlands tires, used, lots of tread still left, great bashing tires...although i used them for the track $30

hey whats they shipped to 33948

+ $9 for shipping

[eraser]

actually i don't need the bumpers so all i want is a set of blue arms (new set if its a complete set} and shock towers!
thnx
would u do that for $120 shipped to Canada???

Ill take it...

[rollinondubz2002]

rollinondubz2002 said
Proline 23mm Wheels with Badlands tires, used, lots of tread still left, great bashing tires...although i used them for the track $30

hey whats they shipped to 33948
+ $9 for shipping

ill take em sent me paypal request to dgraves_us19@yahoo.com for 40 shipped

thxx

[mrpman]

eraser,,, Can you Post what you have left?

[eraser]

eraser,,, Can you Post what you have left?

The only thing thats paid for at this point and thus absolutely spoken for is the dude upper arm mounts... everything else as of right now is still available... its first come first serve.... item is sold when its paid for

[Mr Man]

Iwas wondering if a wing mount can be attatched to the hardcore shocktower that you have for sale?? If it can what mount do you use? I would be intrested in the shocktowers if you could mount a wing.

[calirider]

IF you still have them I will take the 23 mm adapters
how is 25 shipped. to California zip 91786.
let me know thanks.

[rollinondubz2002]

payment for 23mm rims n badlands sent

[eraser]

IF you still have them I will take the 23 mm adapters
how is 25 shipped. to California zip 91786.
let me know thanks.

Thats fine.... email/paypal address listed in first post

[TRY2KPUP]

Ok I got paid today, so im ready to buy the outdrive cups.
Email sent.