killer project Sneetches, after following this off and on, for the last couple weeks, I remember I have a yeti cage laying around, so I pulled my Losi scte 1.0 off the shelf, it was raining buckets outside so seemed like a good day to mess around with it.
After messing around with the suspension, and making an extension for the front shock tower I have 3 1/4" ground clearance front to rear not rested on its own weight and 2 3/4" resting on its own weight with no pre-loads on the shocks, and from resting it has 2" of upward travel, so pretty happy with that.
My next thing is mounting the cage, not to worried about that, what I am not sure of is what weight diff oils to use as mine has a c.d I put associated 1m cst in the c.d which I believe is about the equivalent too 500k diff oil just not sure what I should put in too the front and rear.... any suggestions?
Or maybe I should lock the c.d and go 300k to 500k front rear?
(Last edited by jumpit : 3.15.16 at 2:25 pm)
Check out my youtube channel ------>>>jammer2150 <<<-----