Ultimate RC Home RC Forum RC Videos RC Photos RC Projects & others
Affiliate links:
Sign in:
Reply
Thread Tools
"Experienced user"
nsticka - 1.22.17, 8:27 am Post #1: | Reply With Quote
under acceleration.

only thing changed was swapping out stock hinge pins on rear a arms to strc hinge pins with nut.

wheels, bearings, axles seem fine.

any other ideas or areas to trouble shoot?
Ofna-GTP2e speed runner
Losi-SCTE 1.0-drag/speed 2200kv/6s
TRX-Slash 4x4 8s capable speeder
TRX Rustler VXL-on hiatus currently.
TRX ERBE- 6s and 28/50 gearing; still in progress.
rcfnatic123's Avatar
"Experienced user"
rcfnatic123 - 1.22.17, 11:16 am Post #2: | Reply With Quote
Which slash you got, nitro or electric?
stevenator128's Avatar
"Inexperienced User"
stevenator128 - 1.22.17, 11:31 am Post #3: | Reply With Quote
Are there adjustable rear toe settings you might have changed by accident? Do the rear arms still move up and down freely?
One can lose things and one can loosen things. "Loose" is very rarely a verb; it is an adjective, and it describes the grasp some have on this concept.
"Experienced user"
nsticka - 1.22.17, 1:42 pm Post #4: | Reply With Quote
rcfnatic123 said
Which slash you got, nitro or electric?
electric.

proline lcg chassis rpm'd out.

i did put on new strc rear hub carrier 1 degree toe in on right side.

cant get left rear hub carrier off as the hinge pin is stripped

rear a arms do move freely
Ofna-GTP2e speed runner
Losi-SCTE 1.0-drag/speed 2200kv/6s
TRX-Slash 4x4 8s capable speeder
TRX Rustler VXL-on hiatus currently.
TRX ERBE- 6s and 28/50 gearing; still in progress.
thegrafxguy's Avatar
"Experienced user"
thegrafxguy - 1.22.17, 4:39 pm Post #5: | Reply With Quote
Isn't stock 1.5 degrees? Different toe on each side will definitely cause some weirdness.
RC8.2e Factory Team - RC Gear Shop 2150kv, HW XERun SCT Pro, Savox 1260 Servo

Sakura D4 AWD - Tacon 3930kv, HW EZRun 60a, Blue Bird Servo

Spektrum DX4S
JesterTheJoker's Avatar
"Certified Music Junkie"
JesterTheJoker - 1.23.17, 5:15 am Post #6: | Reply With Quote
as the grafxguy said. theres a .5 degree toe difference between them, theres your issue. Drill out that stripped hinge pin or get a pair of flat nosed locking pliers on it
"My garden is life itself, in the sense that every aspect of it should be taken care of and tended to as you would a rose, trimming off dead leaves and excess, being left with raw beauty, and perfection in my own mind. " - Jester
"Experienced user"
nsticka - 1.23.17, 7:11 am Post #7: | Reply With Quote
thegrafxguy said
Isn't stock 1.5 degrees? Different toe on each side will definitely cause some weirdness.
I do not know as nothing mentioned on website.
Ofna-GTP2e speed runner
Losi-SCTE 1.0-drag/speed 2200kv/6s
TRX-Slash 4x4 8s capable speeder
TRX Rustler VXL-on hiatus currently.
TRX ERBE- 6s and 28/50 gearing; still in progress.
"Experienced user"
nsticka - 1.23.17, 7:13 am Post #8: | Reply With Quote
JesterTheJoker said
as the grafxguy said. theres a .5 degree toe difference between them, theres your issue. Drill out that stripped hinge pin or get a pair of flat nosed locking pliers on it
im going to have to plus I bought the rear hub carriers that came with the kit.

this should do the trick.
Ofna-GTP2e speed runner
Losi-SCTE 1.0-drag/speed 2200kv/6s
TRX-Slash 4x4 8s capable speeder
TRX Rustler VXL-on hiatus currently.
TRX ERBE- 6s and 28/50 gearing; still in progress.
"Experienced user"
nsticka - 1.30.17, 6:45 am Post #9: | Reply With Quote
all good now with replacing rear hub carriers.
Ofna-GTP2e speed runner
Losi-SCTE 1.0-drag/speed 2200kv/6s
TRX-Slash 4x4 8s capable speeder
TRX Rustler VXL-on hiatus currently.
TRX ERBE- 6s and 28/50 gearing; still in progress.
thegrafxguy's Avatar
"Experienced user"
thegrafxguy - 1.30.17, 6:46 am Post #10: | Reply With Quote
Glad it worked out
RC8.2e Factory Team - RC Gear Shop 2150kv, HW XERun SCT Pro, Savox 1260 Servo

Sakura D4 AWD - Tacon 3930kv, HW EZRun 60a, Blue Bird Servo

Spektrum DX4S
Reply
Thread Tools


All times are GMT -7. The time now is 11:53 am.


Original content & design copyright ©2000 - 2016, Bamidele O. Shangobunmi & the Ultimate RC Network. Privacy policy
Manufacturer/vendor images, names, & trademarks are copyrights of their lawful owners & used with permission and/or within Fair Use guidelines.

JANG's LEGO blog - JANGBRiCKS @ YouTube - Playmobil reviews