Mini revo in process - Traxxas 1/16th - MERV, Summit, Rally, etc. @ URC Forums

Affiliate links:

Not a Member Yet? You're Missing Out!

Sign up in minutes for a free URC Network account and you'll be able to post in over 100+ forum categories, search over a decade of archived topics, exchange private messages with other members, upload pictures to the RC photo galleries, and much more!

Already have an account?
Sign in below!

Thread Tools

Page 4 of 4

< Prev

"Vacationing user"

RasmusQueZ - 1.20.13, 6:37 am

Post #31: |

A MERV on a track? Haha... A BB MERV on a track? Hahah...

Honestly. I don't know if you've already tested it but the MERV isn't known to be a track star. And with a BB. No.

"Hunger isn't the answer!"

thefoodman52 - 1.20.13, 7:44 am

Post #32: |

Instead of waiting for the diff to strip out again, just shim it. Shim the new front one you threw in, and the rear one now preventatively.

I wouldn't go overboard with the 540 motor. Stick to less than 4000kv. Just make sure you can find some batteries that'll be able to keep up with the motor combo, that being 35c or higher, to be safe. I'd say 40c-50c packs, realistically though.

"Regular user"

Myk12345 - 1.20.13, 2:53 pm

Post #33: |

I'm not lookin to race just have some fun on the track... Thanks for more battery tip!!

"Experienced user"

anthonyjlc - 1.20.13, 2:59 pm

Post #34: |

540 sensored id look into the tacon motors on nitrorcx.com

Page 4 of 4

< Prev

Thread Tools
Show Printable Version Email this Page

All times are GMT -8. The time now is 5:46 pm.