it seemed to handle and jump fine.
Handling is correct, not the best but correct, and it jump quite nice.
The wing mount had broken of course but the car seems to be pretty goo
I replaced the wing and wing mount by the H.King rattler wing and wing mount. Just need to enlarge a little bit holes for the screws.
your bashing would probably break most cars
A-arms are made with soft plastic, so they are hard to break. But this can let the dog bone bend. Fortunately dog bone aren't hard to straighten. The front a-arms hinge pins bend too often, i have to find hinge pins made with harder steel or spring steel.
For the price, it is really cheap for what it is.
Tamiya Egress - Wild Willy M38 - H.King Rattler - Turnigy SCT 2wd V2 - Basher bsr RZ4 - BZ-444 - HuanQi EP 16 731 - WLtoys A212 1/24 MT - WLtoys K929 1/18 - XC Racing 1/18 - WLtoys 12428 - JLB Racing Truggy - SST Racing 1937 - RH 1/16 MT and SCT - Mammoth Blorza 1/8 - WLtoys 10428