After a near death experience with a parked car i was finally able to bring my slash back to life.
Casualties- mamba monster esc
Strc locking hinge pins bent pretty bad
Strc a arms aluminum rear
Slice a 4.5 chassis bottom plate
After a lil over $200 heres what i came up with
Turnbuckle and camber links all 6
Lunsford titanium hinge pins
Mamba monster esc
x2 stock rear a arms
Its funny cause one pair of a arms came with all the stock pins in the already when opened the package it came in guess ill save em in case i need them
Also got some double shielded bearings i want to try them out to see if they work any better than the traxxas ones i have to change them too often
I had to get another spur gear 40t my 34t got the bearing outer ring stuck in the middle of it and its not moving
Got another bottom plate for the chassis
ill post some pics tomorrow

Before and after pictures please.

I really want to see what aluminum a arms look like bent! if you have any pictures please post!

they weren't bent the strc hinge pin was bent the a arms only lost the plastic piece that holds the hinge pin in place fell out

Pics!

No doubt those STRC pins got bent because of the STRC arms too......



I've cracked an RPM arm, and the hinge pin was still okay~


#DudesAroundHereLoveCarnagePics.

heres the after and before pics

i finally got all the flm pieces i wanted front and rear shock tower and trans case with 4 deg toe in

The last pic, ho-o-ly ..it!

ooooooohhhhh daaaaaaaanng the whole front broke off :O