This might be a good one to sticky in this forum. I'll update it as more stuff is announced.

Here's a list of what is available for hop-ups and new/non-stock parts:

Duratrax (links are to TowerHobbies pages):
> DuraTrax CV Drive Shaft Blue Aluminum Mini Quake (2) - $26.99
> DuraTrax Soft Springs Silver Mini Quake (4) - $7.99
> DuraTrax Hard Springs Yellow Mini Quake (4) - $7.99
> DuraTrax Aluminum Shock Set Blue Mini Quake (4) - $26.99
> DuraTrax Pinion Gear 13T Aluminum Mini Quake - $5.49
> DuraTrax Pinion Gear 19T Aluminum Mini Quake - $5.49
> DuraTrax Spur Gear 45T Mini Quake - $2.69
> DuraTrax Spur Gear Set Mini Quake - $3.59
> DuraTrax Chrome Wheels Mini Quake (4) - $7.29
> DuraTrax Tire Set Mini Quake (4) - $8.99 (this is the same as the stocks)
> DuraTrax Tires On-Road w/Foam Inserts Mini Quake (4) - $9.49
> DuraTrax Tires Split Block Mini Quake (4) - $9.99
> DuraTrax Body Clear Mini Quake - $14.99
> DuraTrax 7.2V NiMH 1100mAh 6 Cell Mini Quake - $16.99
> DuraTrax Aluminum Body Post Blue Mini Quake (4) - $9.49
> DuraTrax Diff Covers Graphite Mini Quake (2) - $8.99
> DuraTrax Chassis Graphite Mini Quake - $23.99
> DuraTrax Knuckle Set Graphite Mini Quake (4) - $9.99
> DuraTrax Shock Tower Set Graphite Mini Quake (2) - $11.99
> DuraTrax Aluminum Motor Heat Sink Blue Mini Quake - $5.49
> DuraTrax Carbon Fiber Upper Chassis Brace Mini Quake - $8.99
> DuraTrax Adjustable Turnbuckle Set Mini Quake - $7.29
> DuraTrax Mini-T Wheel Adapter Mini Quake (2) - $4.49
> DuraTrax Carbon Fiber Main Drive Shaft Mini Quake - $7.99
> DuraTrax Carbon Fiber Battery Strap Mini Quake - $16.99
> DuraTrax Aluminum Knuckle Set Blue Front Mini Quake (2) - $35.99
> DuraTrax Aluminum Knuckle Set Blue Rear Mini Quake (2) - $35.99


Team Helotes
> 2400mah Mini-Quake Conversion Kit - $34.95
> Mini Quake 6 Cell 7.2 Volt 1200mah - $16.95


Lunsford
> Lunsford Racing Titanium Ball Studs DTX Mini Quake (2) - $5.79
> Lunsford Racing Titanium Turnbuckle Kit DTX Mini Quake - $35.99
> Lunsford Racing Titanium Hinge Pin Kit DTX Mini Quake - $18.39


Atomic
> Atomic (#MRX1B) Air Mount Mount For 300/ 370 -BU (Blue) - $22.90
> Atomic (#MRX1S) Air Mount Mount For 300/ 370 -SV (Silver) - $22.90
> Atomic (#MRX2) MRX4 Metal CVDs - $19.90
> Atomic (#Y003) Motor Gear 12T Pinion - $4.90
> Atomic (#Y004) Motor Gear 16T Pinion - $4.90
> Atomic (#MRX3) Titanium Turnbuckle Set For MRX4 - $14.90


TOPCAD
> TOPCAD (#MRX-002) Centre Steering Set For MRX4 (Blue) - $19.90
> TOPCAD (#MRX-002) Centre Steering Set For MRX4 (Silver) - $19.90
> TOPCAD (#MRX-003) Motor Heat Sink For MRX4 (Blue) - $9.90
> TOPCAD (#MRX-003) Motor Heat Sink For MRX4 (Silver) - $9.90
> TOPCAD (#MRX-001) Metal Universal Shaft Set For MRX4 - $19.90
> TOPCAD (#MRX-004) Carbon Centre Shaft - $9.90
> TOPCAD (#MRX-005) Battery Holder with Antenna Mount (BU) - $13.90
> TOPCAD (#MRX-005) Battery Holder with Antenna Mount (SV) - $13.90
> TOPCAD (#MRX-006) Alum. Front & Rear Damper Mount w/Body Post (BU) - $21.90
> TOPCAD (#MRX-006) Alum. Front & Rear Damper Mount w/Body Post (SV) - $21.90
> TOPCAD (#16135B) Front Bumper (BU) For MRX4 - $21.90
> TOPCAD (#16135S) Front Bumper (SV) For MRX4 - $21.90
> TOPCAD (#16136B) Rear Bumper (BU) For MRX4 - $21.90
> TOPCAD (#16136S) Rear Bumper (SV) For MRX4 - $21.90

Oh man, it's gonna cost over $50 to put CVD's on a truck that's only $170 in the first place? If that's the case, I might be going with an RC18T.

Someone from DuraTrax has confirmed that CV Drives are aluminum and DO include the aluminum outdrives.

A pic of the CVD's is up on Tower...check'em out, they look real nice!

For some reason the pic won't show. Here are 2 I'm sure people want to see (including the CVDs)

I like the CVDs being blue and completely aluminum. And I didn't realize that the outdrives snapped into the differential until just the other night (I took apart the truck to check things out). I was previously worried about the outdrives just resting inside the diff, but since they snap in I have no worries.

Good job Duratrax

Wow... looking good DTX! Saving more and more money, but I am leaning towards a Savage SS... considerably more expensive, but the decision is hard... Hmm looks like I will have to get both!

Mamba25/Feigao 130-15S at Starluck RC with 2.3mm shaft for stock pinions.

got a link to the combo and a price? I'll add it to the list.

I can work up combo deals. I have one going to a tester. I'll have to add some to www.starluckrc.com. I'll get a link once my webmaster has it up.

More parts by Duratrax added to the list. And also, more pictures:

Aluminum Shock Set


Aluminum Body Posts


Graphite Chassis